Table of Contents
Advertisement
Available languages
Available languages
Using the stylus switch
Inside the multi-adapter there is a hidden switch which
is used for a number of functions. The stylus switch is
accessible via a hole in the multi-adapter, just next to
the charging port socket. Inside the hole you will see a
small white rectangle which is the stylus switch. Using
the stylus provided in the pack, you can press the
switch when instructed in this user guide.
Using the audio adapter
Some mobile phones do not have standard sockets for
headsets to be connected. So, these phones often
have adapters available to make your phone
compatible with standard headsets. Depending on
the version of JABRA BT200 you have, your package
may include a JABRA audio adapter. To connect the
multi-adapter to your phone using the audio adapter:
1. Plug the audio adapter into your phone.
2. Plug the jack plug from the multi-adapter into the
socket on the audio adapter.
12
2
1
Charging & Battery Time
Before you can use your JABRA BT200 headset, you
need to place it in its Multi-Adapter and charge it fully.
SEE FIGS 1 & 2 (Please note that the headset can be
ON or OFF while charging.) A fully charged battery
provides up to 3 hours of talktime, and up to 96 hours
of standby time. The JABRA BT200 battery does not
need to be completely used before charging – you
can re-charge the product at any time. If the charger
is left connected and charging – it will not over
charger the battery.
To charge the headset and multi-adapter , please
follow this guide:
1. Insert the travel charger's electrical plug into an
electrical outlet.
2. Plug the mains travel charger connector into the
charger port on your multi-adapter .
13
Advertisement
Chapters
Table of Contents
